Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 266

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWOverhauling a pressure-regulator
Overhauling a pressure-regulator, page 266 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.266
EXTRACTED TEXT — FOR REFERENCE ONLY

9. Check that the ball in the cup (4) is not marked in any way. If it is, the cup (4) and its ball must be renewed. Place the cup (4) in the body of the pressure- regulator. Check that the piston (1) is sufficiently withdrawn to allow the ball in the cup (4) to be correctly positioned on its seat. 10, Fit the spring (5) in the body of the pressure- regulator. . 11, Fit the ring seal (7) onto the plug (8).