Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 267

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWOverhauling a pressure-regulator
Overhauling a pressure-regulator, page 267 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.267
EXTRACTED TEXT — FOR REFERENCE ONLY

f) Hold the plug locking nut in a vice fitted with lead jaws. Tighten the nut (1) to between 122 and 144 ft/lbs. (17-20 turning the body with the spindle 2224-T. 14. Place a new ring seal on the bleed screw (cone 2225-T), Place a new ball on the bleed screw ball seating in the pressure regulator body. Fit and lightly tighten the bleed screw in the body. 15. Bench test the pressure regulator. 16. Connect the accumulator to the pressure- regulator, and tighten by hand,