58531 Repair Manual (CX) | Page 120

——_—__— are 2° Valves in the rocking Adjust position 1@% 1; 4@64 3@% 3) 20@%2 4@6 4418681 2@6 2/3083 Fit: the and its gasket, the inlet manifold (if necessary) 2.5 L ENGINE if the valve rockers are still noisy after adjustment, proceed as follows: Loosen the camshaft pulley belt Screw out the three camshaft bearing housing attachment screws (located behind the camshaft pulley) Rotate the crankshaft so as to fully open the exhaust valve of the 4th cylinder. Retighten the bearing housing screws Tension the belt. Adjust the valve clearances