Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 718

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWStrip/assemble to replace engien
Strip/assemble to replace engien, page 718 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.718
EXTRACTED TEXT — FOR REFERENCE ONLY

6. Remove the drive pulley: Use a chisel to remove the metal of the nut turned down into the shaft for locking purposes (1). Remove the pulley, taking care not to lose the adjusting washers. 7. Remove: - the bearing support (2) for the camshaft (spanner 2431-T), - the screws securing the gearbox to the engine (spanners 2431-T and 1677-T), - the starter motor. 8. Disconnect the gearbox from the engine