DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 711

/B/419 12. Disconnect the exhaust downpipe from the exhaust manifold. Remove the securing screw (1) from the clip holding the flexible exhaust pipe. 13. Remove: - the nuts (3) securing the drive shafts to the flanges on the gearbox outlet shafts - the securing screws (2) from the front on the NOTE;- Recover and mark the adjusting shims which may be found between the and the 14. Disconnect the drive shaft, right-hand and left-hand from the pivots Remove the two countersunk head screws and withdraw as far as possible the drive shafts through the pivots and off the studs on the gearbox outlet shafts.