Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 517

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEW; Overhauling a gearbox
; Overhauling a gearbox, page 517 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.517
EXTRACTED TEXT — FOR REFERENCE ONLY

3/¥/233 23, Prepare the bevel pinion, Fit the bearing, (if necessary use a tube 44 mm internal diameter by 240 mm long). 24, Prepare the assembly of differential shaft and housing, right-hand side. NOTE: The right-hand side differential shaft is the shorter. a) Fit the bearing (1) in the housing. Tighten the nut (2) to 72 (10 (spanner 1770-T bis). Lock the nut with the pointed screw (3),