Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 383

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWOverhaul rack
Overhaul rack, page 383 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.383
EXTRACTED TEXT — FOR REFERENCE ONLY

18, Fit the steering housing on bracket 1999-T. Make sure that the inside of the housing is quite clean. Fit the outer cage of the upper bearing and the lower bearing. 19, Fit and adjust the steering pinion and rotating union assembly. a) Fit the steering pinion without the rear balls and without the rotating union, Tighten the nut (2) to 36 ft. lbs (5 inserting an adjusting washer (3) of 3 mm thickness,