EXTRACTED TEXT — FOR REFERENCE ONLY
8. Stripping the gearbox outlets. a) Remove: - the locking screw (13), - the nut (12) (spanner 1770-T -(A)). b) Tap out the shaft (2) using a copper drift. g iy is} = Ss ® s ; NOTE: The cage (6) remains on the shaft (2) but the nylon cage (7) comes away and the balls may fall out. Take care not to lose them. : & & i © a > c) Withdraw the cage (6) (extractor 2405-T). - Remove the seal (5).
