Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 189

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWOverhauling a gearbox
Overhauling a gearbox, page 189 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.189
EXTRACTED TEXT — FOR REFERENCE ONLY

June 1966. Corrective No.1 1/107 ASSEMBLY. 23. a) b) c) d) e) Assembling the clutch housing. Fit the clutch fork ball joint (the position is given by a dowel which engages in the hole in the housing). Tighten the securing screw. Fit the thrust race guide screw (1), with its locknut, and adjust it so that the end is distance of between 94 and 95 mm from the gasket face on the engine side. Tighten the locknut.