Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 63

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWOverhauling an engine
Overhauling an engine, page 63 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.63
EXTRACTED TEXT — FOR REFERENCE ONLY

Fit the bearings in place and oil them. Fit the connecting rod to the crankshaft and fit the connecting rod cap. Tighten the nuts lightly. Insert a second assembly, holding the 2 barrels in place by means of a screw 3074-T, Then fit the other 2 assemblies. Then finish tightening the connecting rod big end nuts to 50 ft/lbs + 3.5 (7 + 0.50 -1.75 ft/lbs, - 0.25 ) -26. Fit the camshaft.