Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 19

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWEngine
Engine, page 19 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.19
EXTRACTED TEXT — FOR REFERENCE ONLY

Connecting rods, Special equipment is required to replace the small end bushes, After fitting, the number marked on the: connecting rod and its cap must be towards: the camshaft. Tighten the connecting rod nuts to 50 ft lbs + 3° +0.5 (7 0.25 m, kg). Distributor. End-float on distributor-drive spindle = 0.15 - 0.30 mm. Contact breaker gap = 0.4 mm.,. Sparks must occur at 90° to each other within: 1° 30! max.