818 Repair Manual (CX) | Page 284

A. BLEEDING THE FRONT BRAKES AND THE AIR CHAMBER (1) NOTE — This bleeding must be out with no Pressure in the system in order to avoid any of the liquid, and consequently the possible formation of air bubbles in the system. 1. Release pressure in the system : a) Raise front of vehicle ( wheels free ). b) Slacken release screw (3) on pressure tor. Remove the wheels. ¢) Place on each, ww (4) a transparent tube with its often: in a clean container d) Maintain EYCBOM ly depressed, and slacken bleed screws (4). e) Remove air chamber (1). Place a transparent tube on the end of pipe (2).