818 Repair Manual (CX) | Page 160

1 to Manual 818-1 ¢ CORR } Supplement Ni gently nut {i /. [e} Switch on ignition Connect a test lamp to earth and to the « RUP » terminal of the ignition coil Turn the distributor until the exact moment when the indicator lamp lights up At this point the distributor is at the static advance point. Switch off the ignition Tighten nut (1) from 19 to 21 mN (1.9 to 2.1 (23 1/2 to 15 ft-lb ) Fit distributor cap and secure it Fit sparking plug in cylinder No 1 2. Checking the ignition timing using o stroboscopic lamp or a test-bench ( See chapter I, page 1 )