Citroën Registry

814 Repair Manual — Volume I — Page 138

Citroën Repair Manual N°814, Volume I
SECTION OVERVIEW

Setting IE static timing with strobe

Setting IE static timing with strobe, page 138 of 454 — 814 Repair Manual — Volume I
REPRESENTATIVE EXCERPT — FOR REFERENCE ONLY (from p.137)

1. Check the condition of the contact breaker points and 6. Check the adjustment of the centrifugal advance: adjust their gap to 0,40 t 4°5mm (0,016 to 0,018 in) curve ; The actual curve must be between the min. and 2. Place the distributor in position on the test bench and max. curves on the graph. connect the test bench coil negative to the distributor : primary terminal. , NOTE :