Choose a section…
Title Page (p.1)
Contents list (p.2)
General recommendations (p.3)
Pressure control valve (p.8)
Press. distribution, regulation (p.9)
D Vehicles (p.12)
Source of presure (p.13)
High-pressure pump (p.15)
Main accumulator (p.16)
Pressure regulator (p.18)
Steering (p.21)
Suspension (p.24)
Dampers (p.28)
Height correction (p.30)
Braking system (p.39)
Brake control valve (p.42)
Hydraulic clutch and g/change (p.44)
General (p.44)
Hydraulic gear selector (p.45)
Centrifugal regulator (p.50)
Clutch lock (p.52)
Clutch re-engagement control (p.54)
GS Vehicles (p.59)
Source of pressure (p.59)
Reservoir (p.60)
High-pressure pump (p.60)
Pressure regulator/ accumulator (p.62)
Suspension cylinders (p.63)
Braking system (p.64)
CX Vehicles (p.65)
Diravi steering (p.66)
REPRESENTATIVE EXCERPT — FOR REFERENCE ONLY (from p.50)
3. Operation a) Centrifugal governor : This transmits by way of a pressure pad, to the control slide-valve, a force which varies with engine speed. With the engine stopped, this force corresponds to the calibration of the springs. When turned the weights fly outwards, compressing the springs until there is a state of balance between the centrifugal force and the spring pressure.
Choose a section…
Title Page (p.1)
Contents list (p.2)
General recommendations (p.3)
Pressure control valve (p.8)
Press. distribution, regulation (p.9)
D Vehicles (p.12)
Source of presure (p.13)
High-pressure pump (p.15)
Main accumulator (p.16)
Pressure regulator (p.18)
Steering (p.21)
Suspension (p.24)
Dampers (p.28)
Height correction (p.30)
Braking system (p.39)
Brake control valve (p.42)
Hydraulic clutch and g/change (p.44)
General (p.44)
Hydraulic gear selector (p.45)
Centrifugal regulator (p.50)
Clutch lock (p.52)
Clutch re-engagement control (p.54)
GS Vehicles (p.59)
Source of pressure (p.59)
Reservoir (p.60)
High-pressure pump (p.60)
Pressure regulator/ accumulator (p.62)
Suspension cylinders (p.63)
Braking system (p.64)
CX Vehicles (p.65)
Diravi steering (p.66)
