Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 722

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWStrip/assemble to replace engien
Strip/assemble to replace engien, page 722 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.722
EXTRACTED TEXT — FOR REFERENCE ONLY

31. Fit the dynamo, Connect the dynamo tie-rod to the water pump. Check the alignment of the dynamo (see Op. DX. 32. 33. 34, 356 231-0). - Fit the dynamo belts, - Tension the belts. Fit the starter motor cable and tighten the nuts. Fit the radiator tie-rod, the earth cable and the sling hook on the water pump. Fit the fan and tighten the screws progressively, Fit the radiator and it. Fit the radiator tie-rod to the radiator.