Citroën Registry
Is my car rare? How many are known? Let’s find out…
Literature

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 666

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWReplacing a rear half-axle
Replacing a rear half-axle, page 666 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.666
EXTRACTED TEXT — FOR REFERENCE ONLY

16. Fit the anti-roll bar (2) giving equal clearance on both ends. NOTE; Fit the anti-roll bar in the original position so as to be able to line up the marks made when dismantling. Tighten the screws in the flanges (1 and 4) to 36 (5 17. Fit the corrector control rod clamp (3). Fit this to the marks made when dismantling. NOTE; If the anti-roll bar or the corrector control rod have been changed, carry out the height operation (see Op. DX. 433-0). 18. Fit the brake piping: