Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 632

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWWork on the timing gear
Work on the timing gear, page 632 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.632
EXTRACTED TEXT — FOR REFERENCE ONLY

33. Tighten the securing screws holding the cylinder head, Observe the order of tightening shown. tightening : 29 (4 2nd tightening : 43 (6 During tightening make quite sure that the spherical 34, ends of the tappet adjusting screws are correctly seated in the sockets of the rocker push-rods. Connect up the lubrication pipe (18) for the valve rocker gear. Insert the double gasket. 35. 36. b) Adjust the valve rocker clearance (see Op. DX.112-0). Fit the cylinder head cover. Fit the gasket on the cylinder head cover. 518/G/ Fit the cylinder head and tighten the screws (brass washers under the heads), to 5.5 (0.75