DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 609

G/325 ASSEMBLY. NOTES: 1) 2) The bearing caps are marked with a figure except the bearing cap at the flywheel end which is not marked. No. 4 bearing is fitted at the timing end. After fitting the bearings, the figures must be towards the camshaft. If the crankshaft main bearings are to be used again, they must be fitted according to the marks made when dismantling. 23, Adjusting the end-float of the crankshaft. REMARKS: 1) 2) 3) The The 4) a) b)