Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 535

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWWork on the gear control
Work on the gear control, page 535 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.535
EXTRACTED TEXT — FOR REFERENCE ONLY

54. Connect up the ball joints of the bell crank lever. - Engage the ball pin (3) in the control shaft. - Engage the bell crank lever (2) on the tail of the ball pin. - Screw in and tighten the ball (1) on the ball pin (3). - Peen over the metal in the end of the ball (1) using a hand press 2427-T (A). - Lubricate the ball joints with graphite grease. - Fit the cups (4) on the ball joints and tighten moderately using spanner MR. 3491-60 (B). - Check the working of the ball joints, and fit split pins to secure the cups (4). 518/