Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 521

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWOverhauling a gearbox
Overhauling a gearbox, page 521 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.521
EXTRACTED TEXT — FOR REFERENCE ONLY

8/y¥/237 d) Adjust the bevel pinion. Remove: - the front cover, - the nut locking the bearing. Remove the bevel pinion and adjusting washer (1). Measure the thickness of the washer which may be, for example, 2.81 mm. It is therefore necessary to replace this washer with a washer 2.81 - 0.09 = 2.72 mm thick. These washers are available from 1.65 to 3.13 mm, in steps of 0.04 mm,