Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 491

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWassembly Op. DJ..100-2
assembly Op. DJ..100-2, page 491 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.491
EXTRACTED TEXT — FOR REFERENCE ONLY

15. 16. 17. 18. 19. 20. 21. 22, 23, 24, 25, Line up the pulleys. Fit the belts and tension them (see Op. DX.231-0). Replace the dummy brake discs by the real ones. It is essential that the maximum run-out, measured on the larger diameter, does not exceed 0.15 mm. Proceed as indicated in paragraph 36A of this operation. Place the handbrake calipers over their respective discs and tighten the nuts to between 72 and 79 ft lbs (10 -.11 Offer up the assembly of radiator, and hydraulic brake units. Fit the fan. Tighten the screws to between 7 and 11 ft lbs (1-1.4 Secure the hydraulic brake units on the gear-