DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 342

Assembly. 10, Prepare the anti-roll bar, Fit the anti-roll bar end stop clamps. ~ Position the right-hand clamp so as to obtain a dimension of 110 + 0,5 mm between the inner face of the ball-pin securing boss and the outer face of the stop clamp (see Op. DX. 433-0, paragraph 13), - Fit the rods for height and headlamp control, without tightening the clamps. 11. Insert the bar thus equipped via the left-hand side of the car,