Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 301

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWReplacing a rear half axle
Replacing a rear half axle, page 301 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.301
EXTRACTED TEXT — FOR REFERENCE ONLY

'w/81 ASSEMBLY. 11, ° Hammer in position the screws securing the bearing housing in the 12, Fit the wheel-arm into the Screw on the slotted ring nut with the thin collar in contact with the Fit and tighten the three shouldered nuts securing the bearing housing. (Do not fit a washer). 13, Check that there is not less than 0.5 mm clearance between the arm and the edge of the bump stop on the chassis at ''j'".