Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 286

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWReplacing a front half-axle
Replacing a front half-axle, page 286 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.286
EXTRACTED TEXT — FOR REFERENCE ONLY

ASSEMBLY. 17, Fit the half-axle, ensuring that the dowels are correctly located in the bores in the front unit. 18. Tighten the screws (10) to 50/65 (7 to 9 19, Adjust the anti-roll bar (see Op. DX. 433-0), 20. Fit the control rod (4) for the height control as well as the nut and locknut (2). 21. Fit the height corrector and then connect the unions (5) (1) and (9) as well as the overflow return (11) and the pipe (12) to the reservoir return.