EXTRACTED TEXT — FOR REFERENCE ONLY
518.Add.1. 8/w/29 19, 20. al. 22. O mn) 19 18 1 OS of © ih! O Onoon 8 3) 9 10 11 12 13 14 15 we Engage the locking sector (2) in the housing (1) and screw in the fulcrum pin (3), Fit the thrust washer (4), the spring (5), the washer or washers (6) and then pin. With the parts assembled, the coils of the spring should be touching with an end-float of between 0 and 0,2 mm. If not, modify the thickness of the washers to obtain this clearance.
