Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 196

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWOverhaul
Overhaul, page 196 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.196
EXTRACTED TEXT — FOR REFERENCE ONLY

d) Adjust the bevel pinion. Remove the front cover. Remove the nut locking the bearing. Remove the bevel pinion and adjusting washer (1). Measure the thickness of the washer which may for example be 2.81 mm. It is therefore necessary to replace this washer with a washer 2.81 - 0.09 = 2.72 mm thick. These washers are available from 1.65 - 3.13 mm thick, in steps of 0,04 mm.