Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 156

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWWork on the pulleys and belts
Work on the pulleys and belts, page 156 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.156
EXTRACTED TEXT — FOR REFERENCE ONLY

REPLACING A BEARING ON THE DRIVESHAFT. REMOVAL. 34, Remove the drive pulley (see this Op., paragraphs 26 - 28). Free the adjusting washers. 35. Remove the screws (1) securing the bearing housing. Remove the housing and the bearing from the shaft. Remove the bearing from the housing. ASSEMBLY. 36. Fit the bearing in the housing, fit over the shaft. Tighten the securing screws. 37. Fit the drive pulley (see this Op. paragraphs 29 - 33). 230 |