Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 134

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWWork on a distributor
Work on a distributor, page 134 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.134
EXTRACTED TEXT — FOR REFERENCE ONLY

4 13 12 11 9 | 14, Adjust the contact gap to 0.4 mm by means of the adjusting screw (6). Fit the rotor (1). Fit the distributor head with its leads. NOTE: When overhauling the distributor, we recommend rubbing with fine emery the end of the rotor and the inside of the contacts in the distributor head to clear any oxides which hinder the passage of the HT current.