Citroën Registry

DS21 & DS21M / DS19A & DS19MA Repair Manual — Page 67

Citroën
Repair Manual — DS21 & DS21M / DS19A & DS19MA
N°518, Edition 1966
SECTION OVERVIEWOverhauling an engine
Overhauling an engine, page 67 of 750 — DS21 & DS21M / DS19A & DS19MA Repair Manual
Page ↔ Forum
Start a discussion
Find related SP-6
518 · p.67
EXTRACTED TEXT — FOR REFERENCE ONLY

The front support has a chamfer which must face towards the push-rod to allow it to be fitted. Place a ring seal (5) over each screw except No.1, in the grooves in the brackets. .(The oil feed to the rocker shaft is through the hole round No.1 screw). Place the rocker assembly on the cylinder head. Tighten the fixing screws of the cylinder head and the rocker assembly to 29 ft/lbs (4 in the order indicated. c) Fit the exhaust rockers.