818 Repair Manual (CX) | Page 77

This operation is to be carried out only in the case of a check and adjustment on a test bench (L'POLLU 2000 type ). = A REMOVAL. 1. Remove cap ( ¢€ ) using flat-nose pliers. 2. Adjust the butterfly opening : - Adjust the butterfly opening using the test bench according to the Norms laid down in the « Etudes Equipement » Nos : 14-1/16 and 14-1/16 (sent ov request to the users of fest benches ). FITTING. 3. Fitcap(¢): - Load gun A. - Screw tool H onto the gun. - Fit cap (¢ ) onto the throttle spindle stop screw. Place the tool and gun assembly against the cap (€ ) and actuate the gun.