814 Repair Manual — Volume I — Page 423

13. Unhook the spring (5) supporting the bulb. Remove the bulb. ASSEMBLY. 14, Holding the QI bulb (4) at « b », position it in the projector with the locating dowels (C) in their housings (d). 15. Hook on the spring (3). 16. Fit the feed wire. 17. Put the headlamp unit (2) in position, engaging the 3 adjusting screws (3), (8) and (9) fully in their plastic sockets. 18. Engage the clip of the rim (1) in the slot, and push the rim on.