814 Repair Manual — Volume I — Page 416

2 OPERATION N° DX. 540-0 : Checking and adjusting the headlamps and controls. D. 54-5 b) Angular positioning : obtain an angle of 90 + 5° between the line of the lever with the ca- hook «h» and cable (7), adjusting clamp «g» on the anti-roll bar if necessary. c) Tighten screw (2) of the clamp on the anti-roll bar (4). 2. Positioning the rear torsion control rod (6) on the rear anti-roll bar (5). a) Remove the rear height control protection plate.